Download Print this page

CYBEX ETU User Manual page 9

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
Unlock the storage latch. Pull the stroller on the handlebar in upright position.
1
Check to make sure the stroller is locked in the fully open position before using it. You hear a click
2
sound if it is done the right way. To attach front wheels, push wheel onto front leg tube until it
clicks into place. Repeat on the other side.
Pull on wheels to make sure both of them are attached.
Assembling the canopy: Stick the hardparts from canopy into the small tubing like shown in the
3
picture (a) Put the small hooks from the softgoods of the canopy into the loops you can see on
the head part of the frame (b).
Use the velcro to fix the canopy softgoods final to the seatunit.
4
In order to losen the hood, take the same steps the other way around.
To open or close canopy, push to the front or the rear of the stroller.
5
To lock the brake please step on pedal and puch it down like shown in the picture. When the
6
brake is locked you hear a click sound. To unlock it push the brake pedal in in upward position.
To recline seatunit, squeeze button and pull the recline strap down until the end of the strap. Push
7
the backpart of the seat down, seat will be in full recline position (a).
To place the seatunit in upright position, squeeze button and push it the whole strap upwards.
To adjust legrest, push the small buttons inside the softgoods on each side. Pull it up until it clicks
8
into place. To lower legrest, push the buttons again and rotate the footrest down.
In order to fold the stroller, push both buttons on handle bar. First the small one, after the bigger
9
one. Lift the stroller slightly on the handle bar and move it forward. The stroller will collaps.
Move the handelbar around and fit it in position. The stroller is compact folded. Storage latch is
10
automatically engaged when folded.
Use the attached handle for carrying. The stroller is overheadcompartment size when folded.
11
To unlock harness, push the button on the crotch buckle then slide the shoulder straps off the
12
waist buckles. To attach the harness and waist straps to the crotch buckle, slide shoulder straps
onto the waist buckles as shown, then click them into the crotch buckle.
Make sure shoulderpads are in right position over your childs shoulders. To adjust harness around
13
your child, tighten shoulder and waist straps by pulling on the free end of the straps as shown.
Important — Keep these instructions for future reference.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
INSTRUCTIONS
EN
9

Advertisement

loading
Need help?

Need help?

Do you have a question about the ETU and is the answer not in the manual?