Safety Instructions - Cisco Aironet AIR-ANT25137NP-R Instructions For Mounting

Safety Instructions

Warning
Warning
Warning
OL-23461-01
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that
accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
Statement 1030
In order to comply with radio frequency (RF) exposure limits, the antennas for
this product should be positioned no less than 6.56 ft (2 m) from your body or
nearby persons. Statement 339
Follow these safety instructions when installing your antenna.
Plan your installation procedure carefully and completely before you begin.
•
If you are installing an antenna for the first time, for your own safety as well
•
as others, seek professional assistance. Consult your dealer, who can explain
which mounting method to use for the location where you intend to install the
antenna.
Select your installation site with safety, as well as performance, in mind.
•
Remember that electric power cables and telephone lines look alike. For your
safety, assume that any line is an electric power line until determined
otherwise.
Call your local power company or building maintenance organization if you
•
are unsure about cables close to your mounting location.
Cisco Aironet Six-Element Dual-Band MIMO Patch Array Antenna (AIR-ANT25137NP-R)
Safety Instructions
7