V-fit AL16/1E Assembly & User Manual page 21

7
Remove the 2 x M5 x 12mm Screws (76) from the back of the Exercise Monitor
(83). Connect the Exercise Monitor Link Wire (42) and the Pulse Sensor Wire (82)
to the Exercise Monitor (83), matching like for like and feeding any excess wire
back into the upright. Carefully fit the Exercise Monitor (83) onto the Exercise
Monitor Bracket and secure using 2 x M5 x 12mm Screws (76) that were removed.
Assembly
SENSOR
PULSE
Note
FULLY TIGHTN all Bolts, Nuts and
Fittings now, ensuring that your
product in located on a clear flat
surface before doing so. Your
product will now be ready to use.
Page 21