Extreme Networks VSP 4900 Series Hardware Installation Manual page 14

VIM5s are ordered separately. Each VIM5's label can be found on the bottom side of the device, as seen
in the following figure:
Figure 3: VIM5 Label
1 = VIM5 label
Table 6: VSP 4900 VIM5 Matrix
VIM5-4X
Usable ports 4
Operational 1Gbps & 10Gbps
speeds
PHY present No
1000BASE-T & 10GBASE-T only
10GBASE-T
Mixed speeds 1Gbps & 10Gbps
1G Auto- Disabled
negotiation
10G Auto- Disabled
negotiation
25G Auto- -
negotiation
FEC -
MACsec -
* The user must set vim-speed to 10G or 25G for VIM5-2Y. The default is 25G.
VSP 4900 Series Switches: Hardware Installation Guide
VIM5-4XE VIM5-2Y
4 2
1Gbps & 10Gbps 10Gbps & 25Gbps 10Gbps & 25Gbps 4x10Gbps w/
Yes Yes
Both 10GBASE-T only
1Gbps & 10Gbps Not supported*
Enabled -
Disabled Disabled
- Disabled
- -
256bit -
Expansion Modules
VIM5-4YE VIM5-2Q
2 1
channelization &
40Gbps
Yes No
10GBASE-T only -
Not supported* -
- -
Disabled -
Enabled for DAC -
Disabled for Fiber
Auto-FEC -
enabled for DAC
and Fiber
256bit -
14