Subscribe to Our Youtube Channel
Related Manuals for Banner TCNM-AD
Summary of Contents for Banner TCNM-AD
- Page 1 TCNM-AD/EX/SP Scanner Family – Setup Procedure Using Programming Barcodes Sep 2013 p/n 174900 Rev. A...
- Page 2 TCNM-AD/EX/SP Setup Procedure Using Programming Barcodes Stand-Alone Layout Barcode To re-program a network scanner for a stand-alone configuration, use the following barcode. Stand-Alone Layout Step 1. Press and hold the SMART-TEACH button to enter the “AutoLearn Mode”. Once button is pressed, the LED cycle appears as follows: Just pressed.
- Page 3 TCNM-AD/EX/SP Setup Procedure Using Programming Barcodes Successful Reading Step 4. The scanner is programmed and the AutoLearn Mode ends. The green “ready” LED is on. Programming Done The Stand-Alone configuration can also be programmed using GeniusPlus. Refer to the Help On Line documentation for further details.
- Page 4 TCNM-AD/EX/SP Setup Procedure Using Programming Barcodes Smart-Teach Key Lock – Unlock Barcode The SMART-TEACH key can be locked and unlocked through two different methods: • GeniusPlus parameter • Programming barcode The programming barcode procedure uses the AutoLearn Mode described earlier. The code below is a toggle-code: •...
Need help?
Do you have a question about the TCNM-AD and is the answer not in the manual?
Questions and answers