ADC WorldDSL EMU-830 User Manual page 45

September 25, 2006
Trap 1 Community String
Trap 1 Validation
Trap 2 IP Address
Trap 2 Community String
Trap 2 Validation
Trap 3 IP Address
Trap 3 Community String
Trap 3 Validation
System Location
System Name
System Contact
LTPE-UM-3159-02
Option
Enter a community string. It must match the SNMP
Comm Name string for traps. SNMP uses the
community string for set and get requests.
Select the trap status by toggling between Valid (the
default) or Invalid. Valid enables the trap, invalid
disables it.
Enter the IP address to which the trap is sent. 0.0.0.0
is the default setting.
Enter a community string. It must match the SNMP
Comm Name string for traps. SNMP uses the
community string for set and get requests.
Select the trap status by toggling between Valid (the
default) or Invalid. Valid enables the trap, invalid
disables it.
Enter the IP address to which the trap is sent. 0.0.0.0
is the default setting.
Enter a community string. It must match the SNMP
Comm Name string for traps. SNMP uses the
community string for set and get requests.
Select the trap status by toggling between Valid (the
default) or Invalid. Valid enables the trap, invalid
disables it.
Field where you enter the physical location of the
system.
Field where you assign a name to the system.
Field where you list the name, title, or phone number
of the system operator or administrator.
Function
Chapter 3: Provisioning
3-13