Table of Contents
Advertisement
Chapter 3: Provisioning
Reset EMU
In the Config menu, press R to display the "reset EMU" warning prompt
IMPORTANT
If you reset the EMU-830, all alarm reporting information is lost.
!
Note:
Resetting the EMU will log you off from the EMU console menu and requires that you log on again
on to regain access.
Do one of the following:
• Press Y (yes) to reset the EMU (then log on to the EMU console menu if you wish to make configuration
changes).
• Press N (no) to return to the Config menu.
Inventory Information Screen
Use the
arrow key to select Inventory, then press ENTER to display the Inventory Information screen (see
3-18 on page
3-23). This is read-only screen providing information about the EMU-830. The data included in the
Inventory Information screen is listed in
3-22
Figure 3-17. Reset EMU Warning Prompt
Table 3-7 on page
3-23.
September 25, 2006
(Figure
3-17).
Figure
LTPE-UM-3159-02
Advertisement
Table of Contents
