ADC TrueNet Termination Block Brochure

Adc termination block brochure

Download this manual

TrueNet

CopperTen

Termination Block

The 20-pair TrueNet

CopperTen

five outgoing four-pair Category 6a cables. Each IDC slot is color-coded to allow for accurate

termination of each of the four pairs. The CopperTen termination block utilizes a disconnect

feature making it ideal for Patch-by-Exception installations and can also be patched as a traditional

cross-connect. The cable manager at the rear of the module ensures that cables are held in place

securely without the need for Velcro ties.

Features:

•

Transmission performance to TIA-568.B.2-10 component compliance as well as 10 Gigabit

•

ISO/IEC 11801 ed.2.1 extrapolated component

•

Color-coded for ease of termination

•

Each module will accommodate five four-pair UTP CopperTen cables

•

45-degree silver-plated IDCs provide secure, reliable gas-tight connections

•

Blocks can be terminated with standard termination tool or with a 110 tool

•

Four-pair to four-pair patch cords are available for Patch-by-Exception installations

•

Four-pair to RJ45 cords are available to interface with network and other equipment

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

termination block is designed to suit five incoming and

Page 1 TrueNet ® CopperTen Termination Block ® The 20-pair TrueNet CopperTen ® ® five outgoing four-pair Category 6a cables. Each IDC slot is color-coded to allow for accurate termination of each of the four pairs. The CopperTen termination block utilizes a disconnect feature making it ideal for Patch-by-Exception installations and can also be patched as a traditional cross-connect.
Page 2: Specifications
TrueNet ® CopperTen Termination Block ® Specifications MECHANICAL Wire range for solid and stranded copper conductors: Wire insulation diameter range (PE, PVC): Number of wire terminations: Wire insertion force (0.5 mm conductor diameter): Wire pull out force, radial (0.5 mm conductor diameter): Wire pull out force, axial (0.5 mm conductor diameter): Number of patching cycles: ELECTRICAL...
Page 3 TrueNet ® CopperTen Termination Block ® O r d e r i n g I n f o r m a t i o n Description Back mount frame 12 way kit 1 x Stainless steel 12 way mounting frame 12 x CopperTen blocks each capable of terminating 5 x CopperTen cables 12 x Rear cable managers: 1 for each CopperTen block 12 x Label holders...
Page 4 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.