Remove Fabric From Machine - Singer SRP-50 Instruction Book

REMOVE FABRIC FROM MACHINE
1. Cut yarn above Yarn Feeder.
Remove the yarn from Feeder and drop yarn end bet-
ween Knitter and Ribber sinker posts.
2. Remove Weights from Cast-on Comb.
3. Change Carriage settings as follows.
Cam Lever .................................... STOCKINET ( 1\, 0) .
Set Levers ................ ....................
0
Russel Levers ............................... 11
4. Holding Cast-on Comb, move Carriage once across nee-
dles.
The stitches are released from needles.
- 2 2 -