Do you have a question about the 737 and is the answer not in the manual?
Questions and answers
Alberta
January 19, 2025
How to I release the bober at the top of my singer sewing machine model 778. I need to know how to release it on the top of my machine
3 comments:
Alberta
January 19, 2025
Show me how to release the bober on top of my sewing machine and I mean the top not bottom its a singer touch & sew model 778.
Mr. Anderson
February 4, 2025
To release the bobbin on the top of a Singer sewing machine model 778, follow these steps:
1. Turn Off the Machine: Ensure the sewing machine is turned off to avoid accidental operation.
2. Lift the Presser Foot: Raise the presser foot to release any tension on the thread.
3. Locate the Bobbin Case Area: On the top of the machine, find the bobbin compartment cover.
4. Open the Bobbin Cover: Slide or lift the cover (depending on the design) to access the bobbin.
5. Release the Bobbin: Gently pull the bobbin out of its holder. If it's snug, lift it while being careful not to damage the thread or the bobbin case.
6. Prepare for Re-insertion or Replacement: Once removed, the bobbin can be refilled or replaced as needed.
Always consult your machine’s manual for specific details, as mechanisms may vary slightly.
This answer is automatically generated
Nite0wl
March 22, 2025
@Alberta To the right of the big hole are 2 'dials'. Push the one closest to the hole up, while holding in there use your other hand to just pop the disk out.
Need help?
Do you have a question about the 737 and is the answer not in the manual?
Questions and answers
How to I release the bober at the top of my singer sewing machine model 778. I need to know how to release it on the top of my machine
Show me how to release the bober on top of my sewing machine and I mean the top not bottom its a singer touch & sew model 778.
To release the bobbin on the top of a Singer sewing machine model 778, follow these steps:
1. Turn Off the Machine: Ensure the sewing machine is turned off to avoid accidental operation.
2. Lift the Presser Foot: Raise the presser foot to release any tension on the thread.
3. Locate the Bobbin Case Area: On the top of the machine, find the bobbin compartment cover.
4. Open the Bobbin Cover: Slide or lift the cover (depending on the design) to access the bobbin.
5. Release the Bobbin: Gently pull the bobbin out of its holder. If it's snug, lift it while being careful not to damage the thread or the bobbin case.
6. Prepare for Re-insertion or Replacement: Once removed, the bobbin can be refilled or replaced as needed.
Always consult your machine’s manual for specific details, as mechanisms may vary slightly.
This answer is automatically generated
@Alberta To the right of the big hole are 2 'dials'. Push the one closest to the hole up, while holding in there use your other hand to just pop the disk out.