Table Of Contents; General Information; The References In The Manual - Swim & Fun Basic 3 Manual

Sandfiltersystem Basic 3
1. General
2. Parts
3. Connecting to power source
4. Setup of the sand filtering system
5. Using for the first time
6. The backwash procedure
7. User instructions for 3-way valve
8. Maintenance
9. Problems and problem solving
10. Relevant accessories
11. Spare parts
1 General
The sand filtering system consists of a filter tank made in one non-welded piece of high quality
polypropylene. The material is completely resistant to corrosion and all standard pool chemicals on
the market. The filtering equipment is equipped with an outlet socket, a pressure gauge and built-in
components such as a sieve bottom, which provides a uniform distribution of water, and a stable PE-
separation wall between the filter and the clean water storage tank. The sand filter is ready for use and
is delivered with a user-friendly three-way valve, which is integrated in the filter lid, a TÜV /GS-
approved pump that is ready for final assembly at the usage site.
The sand filtering system is manufactured from first-class components in accordance with strict
technical standards. Additionally, there is a final product inspection and an automatic pressure test
with air for each individual filter. This manual contains guidance for setup, installation, start-up,
maintenance, repair and service.
NOTE: Correct installation, usage and maintenance of your sand filtering device are your guarantee
for achieving a good filtering quality and a long life for the device. We strongly recommend that you
follow the instructions in the accompanying manual.
The safety notes and references in the manual must be followed at all times.
1.1

The references in the manual

In this manual, the references below have the following meanings:
Warning:
Observe:
NOTE:
Swim & Fun Scandinavia – info@swim-fun.com – www.swim-fun.com
This reference is used in cases where personal injury or other accidents
can occur if the user manual, the operating instructions and usage
procedures are not fully or to any extent adhered to.
This reference is used in cases where damage to the product can occur if
the user manual, the operating instructions and usage procedures are not
fully or to any extent adhered to.
This reference is used to bring attention to specific information.
2
4
5
6
11
12
13
14
15
16
17
2