Device maintenance and repair
7.4 Removing and installing hardware
7.4.6
Removing and installing the power supply fan
Requirement
● The device is opened.
● The power supply has been removed.
Procedure
Removal
1. Pull out the plug of the power supply fan
2. Loosen the four screws
3. Take the power supply fan out of the enclosure.
Installation
Note
Install only a fan of the same type. Note the correct mounting position of the fan.
86
①
.
②
on the enclosure.
SIMATIC IPC627D/827D
Operating Instructions, 09/2014, A5E32990859-AB