Table of Contents
Advertisement
Manual 7XV5655-0BB00
PC <–> modem LAN connection in an existing network
The modem is connected with a patch cable (not cross-over) to a hub or switch in an
existing network to which the operating PC is also connected. The PC usually obtains a
free IP address from the server.
The LAN connection of the operating PC to the network can be checked as described in
the previous section.
After you have started the configuration tool, all modems connected in the same
network segment are found automatically and can be configured (see Section
"Configuration tool")
C53000-G1176-C175-3
In the "Local area connection status" window, go
to
"General"
to display the status of the network connection.
Under "Details..." you can look at the settings
assigned to the connection.
Here, the network addresses are automatically
assigned by a DHCP server in the network.
Page 30 of 79
SIEMENS AG
Advertisement
Table of Contents
