Siemens 7XV5655-0BB00 Manual page 21

Modem for transmission of serial data or protocols from devices with an rs232, rs485 or fo interface via ethernet

Hide thumbs Also See for 7XV5655-0BB00:

Table of Contents

Changing the settings of the Serial Modem with a Terminal Program

The terminal program (e.g. "HyperTerminal" in WINDOWS

„DIGSI Terminal" for WINDOWS

settings relevant to security such as password protection and the valid IP

addresses for call acceptance. These settings can only be activated or changed

via the local RS232 interface using a terminal program, i.e. not via the Ethernet

and also not locally via the Ethernet interface.

SIEMENS AG

XP and WINDOWS

Page 21 of 79

Manual 7XV5655-0BB00

or the program

7) is required to make all

C53000-G1176-C175-3

Table of Contents