Configuring the LAN Interface of the Operating PC
There are two ways of configuring the Serial Modem on a PC using the configuration
tool via its Ethernet interface:
Direct PC <–> modem LAN connection with "cross-over patch cable"
The modem is connected directly to the operating PC using a cross-over patch cable.
The LAN interface of the computer must be assigned a fixed IP address for this
purpose.
Note: If the computer is operated in a company LAN, a variable IP address is usually
assigned by the server (see next section). If the Serial Modem is to be configured
directly via the cross-over cable with this computer, a fixed IP address must be
assigned to this computer for this time.
Select the appropriate "Local area connection" under "Network connections".
SIEMENS AG
In the "Local area connection status" window,
click the
"Properties"
button to switch to the local area connection
settings.
Page 27 of 79
Manual 7XV5655-0BB00
C53000-G1176-C175-3