Safety; Maintenance - Sunrise Medical Empulse R20 User Manual

Undo the 4 straps of the back pack with the buckle (T1)
on the retaining straps of the wheelchair (Fig. 12.2).
T1 T3
Undo the wing bolt (24) in order to remove the controller
unit (T) completely and store in your back pack. To do
this, pull the control unit (T) through the rear zip fastening
of the back pack and store the control unit in the right
back pack pocket (Fig. 12.3).
S 21
R
24
T
You can fix the pushing device on the rear of the back
pack using the Velcro straps.
Empulse R20 Rev.A
Fig. 12.2
T2
Fig. 12.3

13. Safety:

Never leave the pushing device unattended, whether it is
switched on or switched off.
In order to stop the pushing device being stolen and
against unauthorised use, switch the pushing device and
remove the battery.

14. Maintenance

The R20 pushing device is extremely low maintenance.
We recommend that the R20 is checked by a dealer
every 2 years.
Before any maintenance is started, turn the battery off
and remove it.
NOTE: All service and maintenance procedures carried
out on the pushing device require the battery locking key.
Without this key no maintenance is possible.
Maintenance plan
Functionality test und safety check of
the docking system (pushing device and
wheelchair)
Visual check of the docking system,
the back pack fixing for damage (tears,
distortions, etc.)
Visual check of the wheelchair frame,
the backrest tubes for damage (tears,
distortions, dents, etc.)
Check the tyres (profile depth, tears,
damage; and replace if necessary)
Check all cables and plug connections
after 24
months
X
X
X
X
X
15