Siemens NCU 7x0.3 PN Series Manual page 15

The following system configuration is only possible with an NCU 710.3 PN possible:
Figure 2-2 Example, topology with NCU 710.3 PN
The following components can be attached to the Control Unit:
● SINUMERIK operator panel front with TCU/PCU 50.3 and Machine Control
● SIMATIC thin client (as of firmware V1.4)
● SIMATIC CE panel
● SINUMERIK handheld units
● Distributed PLC I/O via PROFIBUS DP or PROFINET IO
● SINUMERIK I/O modules PP 72/48D PN and PP 72/48D 2/2A PN
● SINUMERIK Analog Drive Interface for 4 Axes ADI 4
● SINAMICS 120 drive system
● Feed and main spindle motors
NCU 7x0.3 PN
Manual, 09/2011, 6FC5397-1EP40-0BA0
Panel/Machine Push Button Panel
– 1FT / 1FK / 1FN / 1FW6 / 1FE1 / 2SP1 synchronous motors
– 1PH / 1PM induction motors
System overview
2.2 System configuration
15