1. Manuals
  2. Brands
  3. ADC Manuals
  4. Diagnostic Equipment
  5. AdView
  6. Installation manual

ADC AdView Installation Manual

Hide thumbs
1
2

Advertisement

Table of Contents

The following instructions guide you in adding the temperature module to the
ADC AdView™ Modular Diagnostic
are the temperature module, temperature probe, and a box of probe covers.
The temperature module attaches to the top of the BP module.
It is made up of the following two pieces:
• Part A with the display.
• Part B, the back cover, which holds
the temperature probe and probe
cover box.

Adding the Temperature Module

1. Using the Power button on the right side of the BP module,
ensure that the
ADC AdView™ Modular Diagnostic Station
is turned off.
2. Remove the cover plate from the top of the BP module.
3. Slide part A of the temperature module along the guides on the
top of the BP module from front to back until it snaps into place.
All the segments of the temperature module display will light when
the modules have been connected correctly.
Station. Included in the Temperature Module Kit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AdView and is the answer not in the manual?

Questions and answers

Related Manuals for ADC AdView

Summary of Contents for ADC AdView

  • Page 1 Adding the Temperature Module 1. Using the Power button on the right side of the BP module, ensure that the ADC AdView™ Modular Diagnostic Station is turned off. 2. Remove the cover plate from the top of the BP module.
  • Page 2 “ready” state (BP: battery icon and middle segments of the systolic value are lit; Temperature: appropriate temperature units icon is lit; Pulse Oximetry: the “%SpO2” icon is lit). ADC AdView™ Modular Diagnostic Station Refer to the user’s manual for operation, maintenance and safety instructions.

Table of Contents