INTRODUCTION Thank you for purchasing this CLARKE portable worklight. This double 400W twin halogen floodlight with tripod is suitable for both domestic and trade use and can be used with or without the tripod. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.
SAFETY PRECAUTIONS 1. This worklight must not be immersed in water. 2. Do not look directly into the lamp when switched on as this can damage the eyes. 3. If used with an extension cable always ensure that the extension cable is fully unwound.
Page 4
ELECTRICAL CONNECTIONS - 110V WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO A POWER SUPPLY. This product can be connected to one of the following power supplies: • 110V generator • 110V isolating transformer • 110V site supply •...
The user should purchase a suitable connecting lead which is compatible with the worklight socket. The length giving mobility to the worklight but without becoming a trip hazard. ASSEMBLY & MOUNTING The worklight can be used with or without the tripod stand. The tripod stand is supplied assembled and should be erected before attaching the worklamp assembly.
Replacements can be obtained from your local dealer or Clarke International Spares Department. Type R7s-J118 - 230V -Max 400W Part No. 5460675 1. Release the screw holding the front lens closed and hinge it away from the lamp body. • The tube is a simple spring-fit in the holder at each end.
Need help?
Do you have a question about the HLC400T/110 and is the answer not in the manual?
Questions and answers