Siemens SIMATIC ET 200SP Manual page 84

A.3 Parameter assignment and structure of parameter data record for Oversampling operating mode
Channel header information
The figure below shows the structure of the channel header information.
Figure A-17
Channel parameter block
The figure below shows the structure of the parameters for channels 0 to 7. You enable a
parameter by setting the corresponding bit to "1".
Figure A-18
Digital input module DI 8x24VDC HS (6ES7131-6BF00-0DA0)
Equipment Manual, 11/2019, A5E35243810-AD
Channel header information
Structure byte x to x+1 for the channels 0 to 7
Parameter data records
83