BMW F97 Technical Training Manual page 84

F97/F98￿Complete￿Vehicle
6.￿General￿Vehicle￿Electronics
F97,￿instrument￿cluster
M-specific￿displays:
• M￿Dynamic￿Mode￿(MDM)￿symbol￿in￿place￿of￿the￿DTC
• Additional￿digital￿speed￿indicator
• Display￿of￿all-wheel-drive￿mode
• M1￿=￿M￿Setup￿1
• M2￿=￿M￿Setup￿2
• Display￿of￿gear
• Display￿of￿Drivelogic￿(bar￿symbol￿such￿as￿a￿button)
• Display￿of￿system￿status:￿Engine￿dynamics,￿damper￿control￿and￿M￿Servotronic
• Shiftlight￿function￿inside￿the￿rev￿counter￿(only￿active￿when￿not￿activated￿on￿the￿HUD)
• Temperature-dependent,￿variable￿engine-revolutions￿advance-warning￿field
• Yellow￿indicator￿light￿to￿indicate￿standard￿drive.
In￿the￿instrument￿cluster,￿the￿current￿configuration￿of￿the￿engine￿dynamics,￿damper￿control￿and
Servotronic￿systems￿is￿shown￿in￿the￿upper￿area￿between￿the￿speed￿indicator￿and￿the￿engine￿speed
display.￿This￿function￿can￿be￿activated￿under￿Settings￿in￿the￿Configuration￿menu￿display.
The￿confirmation￿of￿the￿M￿configuration￿for￿M￿DSC,￿engine￿dynamics,￿transmission,￿EDC￿and￿M
Servotronic￿is￿also￿issued￿centrally￿in￿the￿instrument￿cluster.
For￿setting/adjustment￿work￿in￿the￿engine￿dynamics,￿EDC￿and￿M￿Servotronic￿systems￿the￿response￿of
the￿button￿activation￿is￿also￿effected￿as￿a￿list￿in￿the￿instrument￿cluster.
6.2.3.￿M￿Head‐Up￿Display
The￿multi-color￿head-up￿display￿available￿as￿option￿SA￿610￿can￿switch￿to￿the￿M-specific￿display.
The￿following￿information/parameters￿can￿be￿shown:
80