Table of Contents
Advertisement
Icemaker (Optional)
ON/OFF Switch
An icemaker is available as an optional
accessory. The refrigerator accepts the IM4D
kit. The icemaker will produce seven cubes per
cycle approximately 100–130 cubes in a 24-
hour period, depending on freezer compartment
temperature, room temperature, number of
door openings and other use conditions. The
thermistor of the icemaker cools to 15°F (–10°C).
A newly installed refrigerator may take 12 to 24
hours to begin making ice cubes.
arm from moving forward, the icemaker will stop
producing ice.
Normal Icemaker Operation
To hear buzzing sound each time the ice
For several cubes to be joined together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
Fill Cup
not be used because it will not align with the
refrigerator shipped in the handle pack. Should
looking the refrigerator model number up in the
illustrated parts catalogue.
Feeler Arm
When the bin
– 23 –
Icemaker Diagnosing
The icemaker can be manually cycled by pulling
the rake arm up and to the right until it begins
moving on its own. During rake arm movement,
the mold heater of the icemaker will be on which
will allow the rake to drop any ice currently in
the icemaker. Once the rake nears the home
position, the icemaker will call for water.
Icemaker Removal
1. Disconnect icemaker connector.
2. Loosen two Phillips head screws.
3.
away from the left wall.
Wire Shelf
forward.
Wire Shelf Removal
1. Push the wire shelf to one side.
2. Lift up on the opposite corner.
3. Pull shelf out of the freezer.
Advertisement
Table of Contents
