Download Print this page

Cleaning The Ice Cube Tray; Icemaker Usage Precautions - Haier HRF680YPC User Manual

Advertisement

Cleaning the ice cube tray

1 Turn off the icemaker function via the display panel, hold down the handle of the
icemaker, and use strength to pull out the icemaker.
2. Remove the icemaker assembly from the refrigerator and turn over the icemaker,
so that the ice cube tray is visible.
3. Pull the oval shaped fastener on the ice tray in the direction of arrow 1. Tilt the ice
tray upward and pull it out in the direction of arrow 2.
4. After cleaning the tray, put it back in, then firmly push in the icemaker, close the freezer
drawer, and switch on the icemaker function via the display panel.

Icemaker usage precautions

For newly installed appliance, you should wait for 24 hours. This will enable the freezer
compartment to cool down, so that it can make ice.
•The ice machine will make 8 ice cubes each time; but the specific ice-making quantity
will depend on the indoor temperature, frequency that the doors are opened, water
pressure, freezer compartment temperature, etc.
•In order to ensure that the ice tray gets filled up with ice cubes, the ice tray should be
frequently pulled out so that the ice cubes get evenly distributed.
• It is a normal phenomenon that some of the ice cubes will clump together during removing.
•When the freezer compartment reaches or is pelow-8 °C, the icemaker will start making
ice (if you are just beginning to use the icemaker, or it has not been used to make ice in a
long time, you should discard the first several ice cubes, so that impurities in the water l
ine get run out.)
• The icemaker must be installed in the refrigerator through an authorized service agency.
•NEVER expose the water pipe to temperatures below 0°C to avoid freezing.
•Test the tubing for leaks by flushing the tube through with water, until the water runs clear.
•After the appliance has been sited into the location of your choice, make sure that the water
tube is arranged so it does not incur damage through bends and kinks and is clear of any
heat sources.
•Once the temperature inside the freezer is at -8°C ice production will begin.
•DO NOT touch the ice cube outlet with your hands, or any implements to avoid injury
or damage.
30
(Only for HRF680YPS/HRF680YPC)

Advertisement

loading

This manual is also suitable for:

Hrf680ypsHrf680ys