Safety Instructions - Sachtler TOPAS 110 Manual

Manual
4

Safety instructions

Danger of electric shock
Õ
Servicing and maintenance of the electric power supply
must only be carried out by qualified electricians.
Õ
The light must be grounded.
Õ
Switch the TOPAS light on only when fluorescent tubes
have been inserted.
Õ
Before inserting or changing the fluorescent tubes always
disconnect the TOPAS light from the mains.
Õ
Regularly check the electrical fittings and mechanical
safety of the system.
In case of mobile operation: every six months.
In case of stationary operation: every year.
The system must not be operated if damage to the system
is recognized.
Õ
Immediately remove loose connections and burnt wiring.
Danger
Õ
Use only power plugs that are permitted for the power
supply specified on the type plate. In case of doubt, please
contact your local sachtler agent or electric utility.
Õ
Protect the TOPAS light from moisture and dampness.
In case condensation water forms, wait for two hours to
allow for acclimatization.
Õ
The light is designed for studio operation only, outside
operation is not permitted.
Õ
Do not connect any equipment to an electrical power
system when standing in water, or when your hands, the
plug or cable are wet.
Õ
Carry out prescribed adjustment, maintenance and
inspection work.
Make sure you first remove the plug.
- 3 -
TOPAS