Manual
9.1
Inserting the fluorescent tubes
Danger of accident
Õ
Do not use discolored, damaged or deformed fluorescent
tubes.
Warning
Õ
These must be changed immediately.
F
Tubes
Õ
Use 55 W sachtler Tungsten or Daylight tubes or
Important
equivalent standard general-purpose tubes.
Õ Remove all front plug-in units (4-leaf barndoor, filter holder, egg
crate). Push back the safety lock and hold it.
Õ Slide the fluorescent tubes into the wire bracket approximately
2 cm / ¾" (Figure 1) and then press the tubes downwards into
the socket (Figure 2).
If you have any difficulty performing the above instructions, you
can also push the tubes vertically into the socket, when the
locking button has been pressed.
Figure 1
Õ Check whether the
á
The
fluorescent tubes have clicked into the socket in the right way.
fluorescent tubes are in the correct position.
- 11 -
TOPAS
Figure 2