Connecting The Topas Light - Sachtler TOPAS 110 Manual

TOPAS
2
1
9.5

Connecting the TOPAS light

Danger of electric shock
Õ
Pay attention to the correct power supply.
Õ
Connect the light only to the power supply specified on the
Danger
type plate on the back of the light. In case of doubt, please
contact your local sachtler agent or electric utility.
Õ Connect the mains cable (4-pin Amphenol socket) with the
Amphenol plug at the bottom of the light.
You can dim the TOPAS light manually from a local dimmer or from
any DMX lighting control console.
Manual local dimmer:
Õ Using the attached cable, connect the local dimmer to the Dim
socket (7-pin Amphenol) at the bottom of the TOPAS light.
Õ Set the operation mode switch Dim/DMX to Dim.
3
Figure 7
- 14 -
Manual
4