Installing The Batteries - impact PowerSync Mini PS16-Mini-R Instructions Manual

Installing the Batteries

Receiver
1. Remove the receiver from its cradle.
2. Press the battery compartment lock and
open the battery compartment door.
3. Place two AA batteries into the battery
compartment, with the orientation shown
in the diagrams inside the compartment.
4. Close the battery compartment door until
it locks shut.
Transmitter
1. Use the tip of a pen or the included
lanyard pin tool to press the battery
door release, and open the battery
compartment door.
2. Place a CR2450 battery into the battery
compartment with the orientation shown
in the diagram inside the compartment.
3. Close the battery compartment door until
it locks.
7