Page 2
Introduction Thank you for choosing Impact. The Impact PortaFrame Scrim Kit is a flexible way to shape and modify your continuous or strobe light source. Set up the foldable system in minutes, attaching it to standard 3/8-inch grip heads. Fabric scrims block, diffuse, or reduce the light, and give you creative control over the look of your shots.
Page 3
Precautions ⚠ • The Impact PortaFrame Scrim Kit • Use only parts provided by the is designed for use in controlled manufacturer. environments. Bad weather and strong winds can be dangerous • Make sure everything is secure to the personnel and equipment.
Page 4
Overview 1. Folding locking frames 15. Single-net dot 2. Setting pin 16. Carrying case 3. Pin notch 4. 3/8 in. mounting pin 5. Single net (green) 6. Double net (red) 7. 1-stop silk (gray) 8. 2-stop silk (yellow) 9. Light blocker (black) 10.
Page 6
Setup 1. Insert the folded frame’s 3/8-inch mounting pin into a standard grip head, and secure in place. 2. Raise one side of the frame, and seat the setting pin into the pin notch. Repeat for the opposite side. 3. Slip the scrim’s sleeve openings over the sides of the frame.
One-Year Limited Warranty This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair...