impact PowerSync Mini PS16-Mini-R Instructions Manual page 16

Accessories
Your PowerSync Mini system is compatible with a wide variety
of flash units right out of the box, but you may need an accessory
sync cable for some flash units. Below are the plug ends
commonly in use and the equipment they typically connect. Verify
the plug compatible with your equipment.
Visit www.impactstudiolighting.com for a complete list of plugs
and cable lengths available.
16
1/8 in. (3.5 mm)
Miniphoned
Fits a wide variety
of flashes.
Household
2-Blade Plug
Most professional flashes
with dual-blade receptacles,
such as Lumedyne, Norman,
Speedotron, and Dynalite (old)
2.5 mm
Sub-Miniphone
This plug is typically
used only on slave
systems
1/4 in. Phono Plug
Fits most Bowens, Dynalite (new),
Monolite, Profoto, Speedotron, etc.
Hot Shoe
Fits most
cameras
featuring a hot
shoe with a large
center contact