Table of Contents
Advertisement
Backward Compatibility
The PowerSync Mini is backward compatible with Impact's
PowerSync 16 and PowerSync 16-80 systems. See the Backward
Compatibility table for channel configurations.
PowerSync Mini Transmitter to PowerSync 16-80 Receiver
The PowerSync Mini transmitter can be used to trigger the
PowerSync 16-80. Set the PowerSync 16-80 to Receiver (Rx)
or Transmitter/Receiver (Tx/Rx) mode, and use the M button to
accept a signal from the PowerSync Mini transmitter. Make sure
both devices are set to the same channel.
PowerSync Mini Transmitter to PowerSync 16 Receiver
The PowerSync Mini will automatically trigger the PowerSync
16 AC or DC receiver as long as both devices are set to the same
channel.
PowerSync 16-80 Transmitter to PowerSync Mini Receiver
The PowerSync 16-80 can be used to trigger the PowerSync
Mini receiver. Set the PowerSync 16-80 to transmitter (Tx) or
Transmitter/Receiver (Tx/Rx) mode, using the M button to send a
signal. Make sure both devices are set to the same channel.
For channel selection, the PowerSync Mini and PowerSync 16
systems rely on manual channel selection DIP switches. Use
14
Advertisement
Table of Contents
Need help?
Do you have a question about the PowerSync Mini PS16-Mini-R and is the answer not in the manual?