Page 1
BGS-S12-V2 Background Support System INSTRUCTIONS...
Page 2
Thank you for choosing the Impact Background Support System. We designed this background support system from 16-gauge aluminum tubing to be strong but lightweight. It will support seamless paper rolls up to 9´-wide or muslin sheets up to 12´-wide. The four cross-bar sections can be combined into 6´, 9´, or 12´...
Page 3
Setting Up Your Background Support System Start with one of the stands. Unlock the Raise the height of the stand by unlocking legs by turning the knob counter-clockwise. the sections. Start with the lowest knob, Spread the leg sections, but maintain a low and raise each section to your desired center of gravity.
Page 4
Next, assemble the cross bar. You can Connect one section to another by assemble the cross bar sections into a 6, 9, inserting a knobbed end into an open end. or 12-foot length. The ends of your cross Twist the two sections until you can insert bar must be the sections with oval holes.
Page 5
Your Impact Background Support System For a cloth background, you’ll have to rst will now support a cloth or seamless paper remove the cross bar. Slide the cross bar background. into the pocket on top of the background. Then remount the cross bar.
Page 6
It’s a good practice to secure the legs of A cloth background ready for shooting. your background supports with a sandbag or weight bag. A seamless paper background ready for shooting.
Page 7
Impact Collapsible Re ector Holder ME-109P The Impact Collapsible Re ector Holder is a small and convenient attachment that enables a light stand to hold a collapsible re ector. Impact Re ector Panel Kit with Two Fabrics RP-2839,...
One-Year Limited Warranty This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.