Page 1
TrailMaster TAURUS 400UTV Set up instruction Version: 1.0 2013/09/16 This set up instruction guides our customer to set up the go kart TrailMaster TAURUS 400UTV step by step to ensure a correct assembly for safe driving.
Page 2
Instruction Remark Apply Loctite™ 242 to ●Install the rear suspensions (right the attachment bolt &left),attaching its upper end to the when installing. frame with the attachment bolts① Torque of bolt ① M10×1.25×63 securely tightened. 40N.m ① Torque of bolt ② ●Attach the lower end to the lower 40N.m ②...
Page 3
●Install the tie rod end (right & left) Torque of bolt ①M12 to the strut body with the × 1.25×55: 35- 41N.m. attachment bolts①M12×1.25×55 and three washer10 securely tightened. NOTE:Press and leave go of front suspensions. Damping should be smooth throughout the range of travel.
Page 4
Install the cover and back of speedometer by the use of tapping ① screws① ST4.8×16. ●Install the bumper to the frame Torque of bolt② by the use of two boltsM8×20② & (M8×20) 21~25N.m M10×40.③ ② ●Connect the cable of the turn ③...
Page 5
● Install the damper to the frame Grease the end of the damper. by the use of the washer ⑤10 and cotter pin⑥2.5×20. ⑤ ⑥ ●Join the roof frame members, Torque of bolt M8×25 ① 21~25N.m front and rear, right and left, with socket head cap screws M8 ×25①...
Page 6
●Fix the safety belt to the roof frame with attachment bolts. Note: Make sure the belt is passed through from the front of the head rest bracket and is threaded from the back of the back rest bracket so as to avoid the damage of the belt Apply thread caused by friction between the belt fastening glue...
Page 7
Note: 1N.m. = 0.74 lb ft Features subject to change without notice. Before driving please read the user manual of TrailMaster TAURUS 400UTV carefully, you will be given with important safety information and advices. Thanks a lot for choosing TrailMaster TAURUS 400UTV.
Need help?
Do you have a question about the TAURUS 400UTV and is the answer not in the manual?
Questions and answers