Installing Windows 95 - Toshiba Satellite Pro 435CDS Reconfiguration Manual

Reconfiguring a Windows 95 System
5
Installing Windows 95
9 Change the lines to:
if exist toscd001 a:\mscdex ID:TOSCD001 IM:10
rem acc.exe
10 Save the AUTOEXEC.BAT file and close it
11 Eject the modified Toshiba Companion Diskette from
the diskette drive.
You will use this disk in place of the Windows 95 Setup
Boot Disk in the following sections.
Installing Windows 95
This section describes how to install Windows 95 using either
the diskettes you created using the Microsoft System Disks
program or a Wmdows 95 CD-ROM. Follow these steps:
1 If
you're installing from a CD-ROM, make sure the
external diskette drive is connected to the computer
and the CD-ROM module is installed
in
the com-
puter's SelectBay.
2 Insert a bootable diskette
into
the diskette drive:
.:. If
you're reinstalling software on a Satellite Pro
435CDS, insert the Wmdows 95 Setup Boot Disk.
You received this diskette with your computer .
• :. If you're reinstalling software on a Satellite Pro 430
Series computer from diskettes, insert the Windows 95
Setup Boot Disk.
You created this diskette using the Microsoft Create
System Disks program .
• :. If you're reinstalling software on a Satellite Pro 430
Series computer from CD-ROM, insert the modified
Toshiba Companion Diskette.
If you haven't modified this diskette, refer to "Modify
the Toshiba Companion Diskette" on page 4.
Satellite Pro™ 430 Senes/435CDS Reconfiguration Guide