Toshiba Satellite Pro 435CDS Reconfiguration Manual page 25

20
Reconfiguring a Windows 95 System
Installing TranXit
3 If you're installing from diskette, follow these steps:
a Click Start, then click Run.
Windows 95 displays the Run dialog box.
b Type
a:\setup
and click OK.
The Setup program starts.
4 At the TranXit installation screen, click Continue.
S Click OK
to
accept the default installation location of
c:\tranxit
6 If you're installing from diskettes, insert Disk 2 when
requested and click OK.
7
Type
the computer name when requested and click
Continue.
Setup displays the Connection Setup screen.
8 Select Infrared, then click Setup Connection.
9 Select the following and click OK:
COM3
Generic Mode
Variable Mode
115200 Baud
3E8 110 Port Address
IRQ3
Setup displays the Connection Setup Screen.
10 Select Parallel, then click Setup Connection.
11 Select the following and click OK:
LPTI
378 110 Port Address
IRQ7
Turbo
Setup displays the Connection Setup Screen.
Satellite Pro™ 430 Senes/435CDS Reconfiguration Guide