Turn On - Philips CID3688/00 User Manual

Mount in the dashboard
Note
Check wire connections before you mount the
unit into a car.
If preset radio stations are lost when the ignition
the red leads crosswise to the yellow ones.
1
If the car does not have an on-board
the negative terminal of the car battery.
If you disconnect the car battery in
a car that has an on-board drive or
may lost its memory.
bare wires do not touch each other.
2
Ensure that the horizontal slant of the car
dashboard opening is between 0 and 20
degrees. The unit cannot be used if the
dashboard opening's slant angle is above
20 degrees.
3
Install the mounting bolt and place the
supplied rubber cap over the end of the
mounting bolt.
4
5
Reconnect the negative terminal of the
car battery.

Turn on

Caution
Risk of road accidents! Never watch video or
adjust settings while you drive.
1
Press and hold /MUTE/VOL to turn on
the unit.
»
The available OSD (On-Screen Display)
languages are displayed.
2
Tap a language to select.
»
The OSD language is changed to the
selected language immediately.
MUTE/VOL.
/
EN 11