Table of Contents
Advertisement
Connector Connect to
1
CAN BOX
2
Red wire
The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch
If there is no accessory
+12V car battery terminal
that is always live. Be sure
to connect the black ground
(earth) lead to a metal
3
Orange
Illumination switch
wire
4
Black wire
A metal surface of the car
First connect the black
connect the yellow and red
power supply leads.
5
Yellow wire The +12V car battery
which is live at all times.
6
Blue wire
The electric antenna
control lead or power
supply lead of the antenna
booster
If there is no electric
antenna or antenna
operated telescopic
to connect this lead.
7
CAN BOX
8
Green and
Left speaker (Rear)
green/black
wires
9
White and
Left speaker (Front)
white/black
wires
10 Gray and
Right speaker (Front)
gray/black
wires
11 Purple and
Right speaker (Rear)
purple/black
wires
2
Connect the other end of the two ISO
connectors to the car audio system.
EN
9
Advertisement
Table of Contents
