Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Motorola Avigilon NVR4 Series
Summary of Contents for Motorola Avigilon NVR4 Series
-
Page 1: User Guide
User Guide Avigilon NVR4 Workstation NVR4-WKS-8TB and NVR4-WKS-4TB... - Page 2 Copyright © 2019, Avigilon Corporation. All rights reserved. AVIGILON, the AVIGILON logo, AVIGILON CONTROL CENTER, and ACC are trademarks of Avigilon Corporation. Other names or logos mentioned herein may be the trademarks of their respective owners. The absence of the symbols ™ and ® in proximity to each trademark in this document or at all is not a disclaimer of ownership of the related trademark.
-
Page 3: Table Of Contents
Table of Contents Introduction Overview Front View Back View Package Contents Installation Connecting Cables Configuring Windows 10 Activating and Configuring ACC™ Software Troubleshooting Network Configuration Operating System Recovery By Avigilon Recovery Partition Operating System Recovery By External USB LED Indicators Power Status Indicator Hard Drive Activity Indicator... -
Page 4: Introduction
Introduction The Avigilon Network Video Recorder (NVR) 4 Workstation is preloaded with Avigilon Control Center (ACC) software and is configured for exceptional performance and reliability. The NVR4 Workstation can be easily integrated into any existing Avigilon surveillance system or act as the base of a new site. Overview Front View 1. -
Page 5: Back View
5. USB 2.0 ports Accepts USB connectors to external devices. 6. USB 3.1 Gen 1 port and USB 3.1 Gen 2 Type-C port Accepts USB connectors to external devices. Back View 1. DisplayPorts Accepts DisplayPort connectors to display monitors. To ensure optimal performance, use the mDP ports instead of these ports. 2. -
Page 6: Package Contents
5. Power supply connector Accepts power supply connection. Package Contents Ensure the package contains the following: Avigilon NVR4 Workstation Power cable Keyboard and mouse 2 x mDP to DP adapters 2 x mDP to HDMI adapters Package Contents... -
Page 7: Installation
Installation Connecting Cables Refer to the diagrams in Overview on page 1 for the location of the different connectors. Make any of the following connections as required: 1. Connect the keyboard and mouse to the USB connectors on the recorder. 2. Connect the monitors to the dedicated graphics processor on the recorder using one of the following configurations: Monitor ports Connections... -
Page 8: Activating And Configuring Acc™ Software
Note: If you are performing operating system recovery, the ACC client does not automatically start up. For more information about running the local ACC installer, see Operating System Recovery By Avigilon Recovery Partition below. Proceed to activate the license for the Avigilon Control Center software on your Network Video Recorder Workstation. -
Page 9: Operating System Recovery By External Usb
Note: Depending on when your NVR4 Workstation was shipped, it is recommended that you connect to the network when possible to install updates for Windows and ACC Client software after system recovery is completed. For more information about ACC software installations, see http://avigilon.com/recovery. - Page 10 Minimum size of the USB recovery device Creating an external USB recovery device Recovering the operating system from an external USB recovery device The general steps are: 1. Load the Avigilon Recovery Image onto a USB recovery device. 2. Plug the USB recovery device into the workstation. 3.
-
Page 11: Led Indicators
LED Indicators The following table describes what the LEDs on the recorder indicate. For more information on the location of the indicators, see Overview on page 1. Power Status Indicator The power button indicator on the front of the recorder provides power and system state information. The following table describes what the power button LED indicates: LED Indicator Description...