Operating System Recovery By External Usb - Motorola Avigilon NVR4 Series User Manual

Note: Depending on when your NVR4 Workstation was shipped, it is recommended that you
connect to the network when possible to install updates for Windows and ACC Client software after
system recovery is completed. For more information about ACC software installations, see
http://avigilon.com/recovery.
1. Start operating system recovery in one of the following ways:
On your Windows desktop, select
l
On your locked Windows screen, select
l
Restart.
During direct boot of the operating system, repeatedly press the down-arrow key and select
l
the partition.
2. On the Choose an option screen, select Use another operating system.
3. Select the OS Recovery partition.
4. On the Avigilon Recovery window, select Recover.
Allow up to half an hour for the recovery to complete.
5. After system reboot, complete the Windows setup process. For more information, see
Windows 10 on page 4.
6. Navigate to C:\Avigilon\Control Center Installation Files, and run the ACC installer
for the version of ACC software in use at your site.

Operating System Recovery By External USB

If you need to recover the Windows operating system on the NVR4 Workstation and you have access to the
internet, it is recommended that you download the latest Avigilon Recovery Image from
http://avigilon.com/recovery
Operating System Recovery By External USB
and then hold down the Shift key and select Restart.
and refer to Support and Downloads for the following information:
and then hold down the Shift key and select
Configuring
6