Set The Sleep Timer; Adjust Display Brightness; Adjust Sound; Adjust Volume Level - Philips DC291 User Manual

Repeat alarm
When the alarm rings, press BRIGHTNESS/REP ALM.
» The alarm repeats ringing minutes later.
Tip
‡
You can press / to adjust the interval to repeat alarm.
Stop alarm ring
When the alarm rings, press the corresponding
ALM 1 or ALM 2.
» The alarm stops but the alarm settings
remain.
View the alarm settings
Press ALM 1 or ALM 2.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
Press SLEEP repeatedly to select a set period of
time (in minutes).
» When the sleep timer is activated, the
display shows , and the volume will
gradually decrease in the last 5 minutes.
To deactivate sleep timer
Press SLEEP repeatedly until [OFF] (off) is displayed.
» When the sleep timer is deactivated,
disappears on the display.

Adjust display brightness

Press BRIGHTNESS/REP ALM repeatedly to
select different levels of display brightness.
16 EN
All manuals and user guides at all-guides.com

7 Adjust sound

Adjust volume level

During play, press VOL +/- to increase/decrease
the volume level.

Mute sound

During play, press MUTE to mute/unmute sound.

Select a preset sound effect

During play, press DSC repeatedly to select:
‡ [ROCK] (rock)
‡ [JAZZ] (jazz)
‡ [POP] (pop)
‡ [CLASSIC] (classic)
‡ [FLAT] ÁDW

Enhance bass

During play, press DBB to turn on or off
dynamic bass enhancement.
» If DBB is activated, [DBB] is displayed.