Installing Cord Storage Hooks; Water Drain Accessories - Seeley Convair CP9CW3 Owner's Manual

INSTALLING ACCESSORIES
CORD STORAGE HOOKS
Assemble the cord storage hook onto the
back of the unit with the 2 screws provided
(Fig 7) . Ensure the hooks are pointing in the
correct direction as shown.
Cord hook direction
7
Cord hook
Screw

WATER DRAIN ACCESSORIES

During operation water will collect in the
bottom of the air conditioners tank.
The cooler is provided with optional
accessories that allow for water to be easily
drained when the tank is full. Alternately
water can be drained continuously away
from the cooler during operation.
Option 1 : drainage from bottom drain point
(refer Fig 8).
Remove the rubber plug from the bottom
!
drainage port.
Fix the drainage pipe clip on the right rear
!
side with screw provided.
Fit the drain pipe to the bottom drain
!
point, fix it in place with the pipe clamp.
Fit the rubber plug to the pipe end and fix
!
in place with the pipe clamp.
Place the pipe end into the pipe clip while
!
the unit is in operation.
6 CP9CW3 Portable Refrigerated Air Conditioner
drainage port
8
pipe clip
drainage pipe
pipe clamp
Option 2: continuous drainage from central
hole (refer Fig 9).
Remove the drain cap from the left centre
!
of the rear panel by turning counter
clockwise. Remove the ruber stop from
the spout.
Screw on the drain connector by turning
!
clockwise.
Attach a Ø14 I.D. drain hose (not
!
supplied) onto the drain connector, and
direct water to a suitable drain point
CAUTION: water will continuously drain from
the hose during cooling or dehumidifying
mode operation. Ensure the hose is
secured above a drain point to prevent
damge to floor coverings and surrounds!
screw
plug
pipe
clamp