Table of Contents
Advertisement
Chapter 1 Getting Started
Chapter 1 Getting Started
Diagrams
LS220DB
1
Power LED
The power LED glows white while the LinkStation is on.
The power LED blinks white while the LinkStation is booting or shutting down.
If an error occurs, the power LED blinks red.
If there is a status message, the power LED blinks amber.
If there is new firmware available, the power LED glows amber.
2
Function LED
This LED glows white while the LinkStation is being initialized and while dismounting USB devices. It blinks
white during Direct Copy.
3
Function Button
Use this button for Direct Copy, dismounting USB devices, and initializing settings.
4
Power Switch
Move the switch up and down to power on and off.
5
USB 2.0 Port
Compatible USB drives, USB printers, and UPS devices can be connected. USB hubs are not supported.
7
1
2
9
12
13
8
3
4
5
6
8
10
11
Advertisement
Table of Contents
