PNI Hunting 3C User Manual page 47

1) OFF;
2) ON; Choose ON to enter to set up a time when you want camera to send you the Daily Report;
Contents contain in Daily Report: Device IMEI Number, CSQ (Signal Strength): 0~31, Camera ID,
Temperature, Date & Time, Battery Left Volume, SD Card Info, Total Pics Taken by Cam, Pics Sent by Cam.
Other

English...
Language
Date/Time Month: date : year; hour : minute : second
Note:
Stamp Imprints of programmed camera ID, moon phase, temperature, date, and time on photo
Battery Type Alkaline/ NI-MH
Choose correct battery type of used batteries in camera makes camera perform better.
Frequency 50HZ, 60HZ; improper setting may cause camera screen flicker
SD Cycle Select "ON", press "OK", camera will continue to record photos/videos by deleting earliest photos
or video clips.
Reset Select "Yes" to reset camera back to factory default settings.
Password Select "ON", press "OK", to enable password protection for your camera; support totally 6 digits/
alphabets long password access.
Firmware version in camera (Version: / IMEI: / MCU:)
About
Pls adjust camera date/time to ensure some functions work as expected.
- 47 -