Key Features - PNI Hunting 3C User Manual

3.6 Attention
11) Insert the SD memory card correctly, camera does not support SD card hot swap (insertion).
12) Please use high-quality AA batteries in order to prevent battery cells from corrosion of leaked acid.
13) Use right adaptor (12V/2A) of this camera to supply power, and do not invert the electrode when put in
batteries.
14) In Setup Mode, camera will automatically enter Auto Motion Detection Mode if no keypad touching within
60 sec. Please manually turn ON it as if you want to do some further configuration.
15) Don't interrupt power supply during system upgrade, please deliver it back to factory if the device doesn't
work after upgrading.
16) Do not frequently insert or pull out SD card and battery or plug in and out the adaptor when the camera is
on.
17) Do not have any floating objects, such as leaves, strings, or ribbons in the 3M motion detection zone of
cameras, to avoid mistaking photograph or videos.
18) Do not keep camera next to hot irrelevant objects, air conditioner exhaust vents, and light, etc. to avoid
mistaking photos or videos.
19) Wide angle model is with a 100° FOV lens which means more flash is needed to get better night time
images than the average 52° FOV lens from market; that's why 56pcs 60° IR LEDs are used on this
camera. But ensure these 56pcs IR LEDs can give enough flash to back the wide angle lens up that high
qualified AA batteries must be applied accordingly to deliver enough amperage to power the illuminator
consistently in dark environments.
20) Programmed Date/Time can be saved in camera for 12 hours as long as camera was powered 1 hour
above.

3.7 Key Features

17) 0.4 seconds
18) Wide lens model:
19) Regular lens model:
20) 12MP/ 1080P@30FPS;
21) Programmable 5/8/12 Megapixel high-quality resolution;
trigger speed;
100 degree FOV lens; 110 degree PIR angle;
52 degree FOV lens; 52 degree PIR angle;
- 39 -