Table of Contents
Advertisement
NOTE:
*
1
: Adjust the seatback to the most upright position. Move the front seat to the rear most
position.
If the head restraint interferes with your child restraint system, and the head restraint
can be removed, remove the head restraint.
If the passenger seat is equipped with a vertical height adjuster, it must be placed in
the upper most position.
Follow these procedures:
• For installing a baby seat (infant seat) with support base
If the baby seat (infant seat) interferes with the seatback when latching the baby seat
(infant seat) into the support base, adjust the seatback rearward until there is no
interference.
• For installing a forward-facing child seat (convertible seat)
If there is gap between the child seat (convertible seat) and the seatback, tilt the
seatback rearward until good contact is achieved.
If the seat belt shoulder anchor is ahead of the child seat belt guide, move the seat
cushion forward.
• For installing a junior seat (booster seat)
If the child in your child restraint system is in a very upright position, adjust the seat-
back to the most comfortable position.
If the seat belt shoulder anchor is ahead of the child seat belt guide, move the seat
cushion forward.
*
2
: If the head restraint interferes with your child restraint system, and the head restraint
can be removed, remove the head restraint.
The child restraint systems mentioned in the table may not be available outside of
the EU area.
Other child restraint systems which are different from the systems mentioned in
the table can be used, but the suitability of the systems must be carefully checked
with the child restraint system manufacturer concerned and the seller of those
seats.
GX460_OM_OM60R28E_(GE)
49
1-1. For safe use
1
Advertisement
Table of Contents
