Lexus GX 460 2020 Owner's Manual page 108

Changing the door unlock function setting
■
It is possible to set which doors the entry function unlocks using the wireless remote con-
trol.
Turn the engine switch off.
1
When the indicator light on the key surface is not on, press and hold
2
for approximately 5 seconds while pressing and holding
The setting changes each time an operation is performed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds, and
repeat step
Multi-information
display
To prevent unintended triggering of the alarm, unlock the doors using the wireless
remote control and open and close a door once after the settings have been changed. (If
a door or the glass hatch is not opened within 30 seconds after
doors will be locked again and the alarm will automatically be set.)
In a case that the alarm is triggered, immediately stop the alarm. (P. 73)
GX460_OM_OM60R28E_(GE)
3-2. Opening, closing and locking the doors
.)
2
Unlocking function
Holding the driver's door handle
unlocks only the driver's door.
Holding the front passenger's
door handle unlocks all the
doors.
Holding either front door handle
unlocks all the doors.
or
.
Beep
Exterior: Beeps 3 times
Interior: Pings once
Exterior: Beeps twice
Interior: Pings once
is pressed, the
107
3