Table of Contents
Advertisement
366
4-5. Using the driving support systems
If you notice any symptoms
■
If you notice any of the following symptoms, refer to the likely cause and the
solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected by
your Lexus dealer.
The image is difficult to see
• The vehicle is in a dark area
• The temperature around the lens is
either high or low
• The outside temperature is low
• There are water droplets on the cam-
era
• It is raining or humid
• Foreign matter (mud etc.) is adhering to
the camera
• Sunlight or headlights are shining
directly into the camera
• The vehicle is under fluorescent lights,
sodium lights, mercury lights, etc.
The image is blurry
Dirt or foreign matter (such as water
droplets, snow, mud, etc.) is adhering to
the camera
The image is out of alignment
The camera or surrounding area has
received a strong impact
The guide lines are very far out of alignment
The camera position is out of alignment
• The vehicle is tilted (there is a heavy
load on the vehicle, tire pressure is low
due to a tire puncture, etc.)
• The vehicle is used on an incline
GX460_OM_OM60R28E_(GE)
Likely cause
Solution
Drive while visually checking the vehicle's
surroundings. (Use the Multi-terrain
Monitor again once conditions have been
improved.)
The procedure for adjusting the picture
quality of the Multi-terrain Monitor is
same as the procedure for adjusting the
navigation screen. Refer to the "Naviga-
tion System Owner's Manual" or "Navi-
gation and Multimedia System Owner's
Manual".
Flush the camera with a large quantity of
water and wipe the camera lens with a
soft and wet cloth.
Have the vehicle inspected by your Lexus
dealer.
Have the vehicle inspected at your Lexus
dealer.
If this happens due to these causes, it
does not indicate a malfunction.
Drive while visually checking the vehicle's
surroundings.
Advertisement
Table of Contents
