Table of Contents
Advertisement
230
4-5. Using the driving support systems
Operational conditions
■
Availability of the pedestrian detection function depends on the region in which the vehi-
cle was sold. (For specific countries/areas: P. 225)
Read the following for details:
Region A
(The pedestrian detection function is available)
The pre-collision system is enabled and the system determines that the possibility of a
frontal collision with a vehicle or pedestrian is high.
Each function is operational at the following speeds:
Pre-collision warning:
●
• Vehicle speed is between approximately 10 and 180 km/h (7 and 110 mph). (For
detecting a pedestrian, vehicle speed is between approximately 10 and 80 km/h
[7 and 50 mph].)
• The relative speed between your vehicle and the vehicle or pedestrian ahead is
approximately 10 km/h (7 mph) or more.
Pre-collision brake assist:
●
• Vehicle speed is between approximately 30 and 180 km/h (20 and 110 mph). (For
detecting a pedestrian, vehicle speed is between approximately 30 and 80 km/h
[20 and 50 mph].)
• The relative speed between your vehicle and the vehicle or pedestrian ahead is
approximately 30 km/h (20 mph) or more.
Pre-collision braking:
●
• Vehicle speed is between approximately 10 and 180 km/h (7 and 110 mph). (For
detecting a pedestrian, vehicle speed is between approximately 10 and 80 km/h
[7 and 50 mph].)
• The relative speed between your vehicle and the vehicle or pedestrian ahead is
approximately 10 km/h (7 mph) or more.
The system may not operate in the following situations:
If a battery terminal has been disconnected and reconnected and then the vehicle has
●
not been driven for a certain amount of time
If the shift lever is in R
●
If VSC is disabled (only the pre-collision warning function will be operational)
●
If the low speed four-wheel drive indicator is illuminated (only the pre-collision warning
●
function will be operational)
GX460_OM_OM60R28E_(GE)
Advertisement
Table of Contents
