Summary of Contents for Better Bathrooms Windsor 550 Mirrored Cabinet
Page 1
Windsor 550 Mirrored Cabinet with 1 Light This instruction will cover installation of the following units Codes: 7689 0333 777 4777 0333 777 4777 ClassIII approved product(output voltage 12V) does not need earth wire...
Page 2
Figure1 Installation Guide *** The unit can only be installed by fully qualified electrician. 1. Position the mirror in a suitable location,make sure the domestic electrical mains supply is within reach of the electrical entry point of the product. 2. Carefully mark the position of the mirror using a soft pencil ensuring it is level. Remove the mirror and mark the mounting points.
Page 3
Page 3 Page 4 Installation Guide Product Specification 4. Insert wall plugs level with the surface of the wall. If fitting to a tiled surface, wall plugs should be inserted below the tile surface to avoid cracking. 5. Screw supplied fixings into wall plugs. 6.
Need help?
Do you have a question about the Windsor 550 Mirrored Cabinet and is the answer not in the manual?
Questions and answers