Related Manuals for Better Bathrooms BeBa 26154
Summary of Contents for Better Bathrooms BeBa 26154
- Page 1 WALL MOUNTED LED MIRRORED CABINET WITH SHAVER SOCKET AND DEMISTER BeBa_26154 • INFARED SENSOR CONTROL • ADJUSTABLE STAINLESS-STEEL BUFFER HINGE • IP44 INGRESS PROTECTION • ALUMINIUM ALLOY CABINET...
-
Page 2: Table Of Contents
CONGRATULATIONS ON YOUR PURCHASE Our aim at Better Bathrooms is to bring you extraordinary bathroom products, for less. If you’re after a modern, traditional, or a totally unique style bathroom, we have the fittings and fixtures to bring your ideas to life, so you can fall in love with your space every day. -
Page 3: Safety
SAFETY • This cabinet should be installed by a qualified electrician. • This fitting is only suitable for connection to a 220-240V earthed supply in accordance with current IEE wiring regulations, and should be installed in accordance with local Building Regulations. •... -
Page 4: Bathroom Zones
BATHROOM ZONES Zone 0: The interior of the bathtub or shower basin. The area around the bathtub or shower basin up Zone 1: to a height of 2.25m above the floor The area stretching to 0.6m outside the bath or Zone 2: shower and above the bath or shower if over 2.25m... -
Page 5: Parts Supplied
PARTS SUPPLIED WALL PLUGS (X4) SCREWS M4 (X4) ALUMINIUM BAR (X1) PLEASE NOTE: It is the installers responsibility to ensure that the fittings are suitable for the type of wall. Alternative fittings may be required (Not Supplied). If unsure professional advice should be sought. TOOLS REQUIRED tool TAPE MEASURE... -
Page 6: Installing The Cabinet
INSTALLATION The cabinet is supplied with a hanging bar to mount the cabinet onto the wall. At the back of the cabinet there is a corresponding bar which is designed to slot onto the hanging bar. Choose the desired position of the cabinet, and from that determine the required position of the hanging bar. -
Page 7: Door Adjustment
DOOR ADJUSTMENT If the door is not level, you can adjust it using the hinge screw. Turning the screw clockwise will push the door right, and turning anticlockwise will pull it right. SHELF ADJUSTMENT Loosen the snap screw on the shelf to adjust the shelf position. -
Page 8: Operation
OPERATION Your mirror comes with an infrared sensor located on the right-hand side. To activate the light and the demister, move your hand across the sensor once at a distance of around 5cm. To turn the light and demister off, move your hand across the sensor again. -
Page 9: Technical Specifications
DISPOSAL Recycling facilities are now available for all customers at which you can deposit your old electrical products. Customers will be able to take any old electrical equipment to participating sites run by their local councils. Please remember that this equipment will be further handled during the recycling process, so please be considerate when depositing your equipment.
Need help?
Do you have a question about the BeBa 26154 and is the answer not in the manual?
Questions and answers