Better Bathrooms 10034 Installation Manual

Toilet seat and cover

Installation manual for toilet seat and cover

This instruction is used on code:10034

Note: Seat may require installation before fitting of the pan, please check!!!

Thank you for using our products. In order to install our product, please follow the instructions

below and check all components are present before commencing. Prepare all the needed tools

and materials for installation.

①

②

PP washer

③

1. Fit the screw into the hinge

nut

④

⑤

toilet seat

screw

hinge

Table of Contents

Do you have a question about the 10034 and is the answer not in the manual?

Page 1 Installation manual for toilet seat and cover This instruction is used on code:10034 Note: Seat may require installation before fitting of the pan, please check!!! Thank you for using our products. In order to install our product, please follow the instructions below and check all components are present before commencing.
Page 2 2. Align the screws with the holes on the pan Once located make any necessary adjustments W.C bowl Fit the washer and nut and secure into position Importance: * After installation ensure the fixings are fully secured * During use do not push the seat down, as this will cause damage to the soft close mechanism * No abrasive cleaning agents or materials can be used, a soft clean cloth should be used For further details or advise call Customer Services on 0844 484 778...